Should I Use Antifreeze? 3 Rules For Antifreeze Use In An Outdoor Boiler
Many outdoor wood boiler owners ask the question “Should I put antifreeze in my outdoor boiler?”
The answer is almost always the same – “NO!”
Why not? 3 Simple reasons:
- You most likely don’t need it – but see the exceptions below.
- Antifreeze is very expensive. We are burning wood to save money, right?
- Antifreeze reduces your efficiency by approximately 13 percent.
But, if you will be away from the outdoor furnace, or cannot continue to use the boiler, antifreeze may be your best option. You may also have health issues or in rare cases, you face the risk of having no electricity for an extended period of time – these are also considerations.
Antifreeze as water treatment? NOPE! This is the most important point and is often misunderstood – even if you use antifreeze, you must STILL use Liquid Armor water treatment. Antifreeze is NOT a substitute for water treatment and will not protect your boiler from corrosion. Remember the rule: “Always keep your boiler full of properly treated water!” Always use Liquid Armor water treatment!
Which type of antifreeze is best? You MUST NEVER USE automobile antifreeze, also known as ethylene glycol – never, period. This is a toxic product, it will void your warranty, and you must never have this in your home. (If you have used this in your boiler, remove it immediately and dispose of it properly.) You may only use food-grade propylene glycol. Do not use RV antifreeze – that is intended only for toilets and drains. You will need to use a concentrated propylene glycol product similar to Dow Frost or Noble NOBURST. Also, remember that some brands of antifreeze need to be periodically recharged. Use only high-quality propylene glycol!
- How much antifreeze is needed? We cannot say because you must FOLLOW the antifreeze manufacturer’s recommendation for how much antifreeze to use, according to the freeze protection you need. Some antifreeze products will give you freeze protection to 10 degrees at 40 percent mixture, some products will give you freeze protection only to 20 degrees with 75 percent mixture. So since every product is different, and your needs for freeze protection will depend upon where you live and the circumstances of your installation, follow the manufacturer’s guidelines!
A customer once called and said that his pipes were frozen, but he had used antifreeze. We asked how much, and he said that he thought 15 percent would be sufficient. Obviously, it was not, and when he checked the manufacturer’s recommendation, he found that their solution could not provide him the freeze protection he needed unless he had a 60 percent mixture in his water jacket.